98/08/19
rev. April, 01

SUPPLY CONNECTIONS FOR PICNIC CAMERA:
=====================================

		POWER									inDEWAR
		SUPPLY BOX	CARD BOX 	CARD BOX BACKPANEL	 DEWAR		AMP CARD	DET CARD
SIGNAL		DE9-S		BACKPLANE	DE9-P	DE9-S		BENDIX-10	DA15-S		DA15-P
				(PADS)
================================================================================================================

SUPPLY IN	1		+15V		1		
		7		AGND		7
		3		-15V		3
		5		+8V		5
		9		DGND		9
						6(SHIELD) (*)
SUPPLY OUT:

Amp Supply			+12V			1		B		10
				AGND			2		A		11
				-12V			3		H		12
							5(SHIELD)(*)	C
PICNIC Supply

VDD(+5V)			a32 (**)		6		J				1
VSS(DGND)			a31 (**)		7		K				9
							9(SHIELD)(*)	C

OTHER:

I_heater								E -> pin 3  of cross-brace DE9
I_heater								D -> pin 5  of cross-brace DE9
I_sensor(+)								G -> pin 15 of cross-brace DA15
I_sensor(-)								F -> pin 8  of cross-brace DA15


NOTES:
******

(*)  connected to card box chassis

(**) From card box backplane digital supply bus. (spare EURO DIN conn. pad pattern)

(1) Pads 1,3,4,5,7,9,11,14,15 of AMP CARD DA15 are grounded (AGND).
(2) Pins 14, 15 of AMP CARD DA15 are connected to GROUND POINT in DEWAR.
(3) Pad 10 of AMP CARD DA15 is connected to +12V plane.
(4) Pad 12 of AMP CARD DA15 is connected to -12V plane.

- pinout of T-sensing signals is different from NICMOS3 camera, unfortunately.